Dell POWEREDGE M1000E - Manual (Page 628)

628 QoS Commands
User Guidelines
This command has no user guidelines.
Example
The following example displays how to add a match condition using the
"snmp" port name keyword.
console(config-classmap)#match srcl4port snmp
match vlan
Use the match vlan command in Class-Map Configuration mode to add to
the specified class definition a match condition based on the value of the
layer 2 VLAN Identifier field. This field is the only tag in a single tagged
packet or the first or outer tag of a double VLAN packet.
Syntax
match vlan vlan-id
• vlan-id — Specifies a VLAN ID as an integer. (Range: 0–4095)
Default Configuration
This command has no default configuration.
Command Mode
Class-Map Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example displays adding a match condition for the VLAN ID
"2."
console(config-classmap)#match vlan 2
2CSPC4.XModular-SWUM200.book Page 628 Thursday, March 10, 2011 11:18 AM