Syntax, Parameter description, Default configuration – Dell POWEREDGE M1000E User Manual
Page 949: Command mode, User guidelines, Example, Show ipv6 pimsm
IPv6 PIM Commands
949
Syntax
ipv6 pim ssm { default |
group-address
group-mask
}
no ipv6 pim ssm { default |
group-address
group-mask
}
Parameter Description
Default Configuration
There are no group addresses configured by default.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(config)#ipv6 pim ssm ffe8::01::00:00:00 /96
show ipv6 pimsm
Use the show ipv6 pimsm command to display global status of IPv6 PIMSM
and its IPv6 routing interfaces.
Syntax
show ipv6 pimsm
Default Configuration
There is no default configuration for this command.
Parameter
Description
default
Defines the SSM range access list to 232/8.
group-address
An IPv6 multicast group address.
group-mask
An IPv6 mask in /prefix form.
2CSPC4.XModular-SWUM200.book Page 949 Thursday, March 10, 2011 11:18 AM