Dell POWEREDGE M1000E - Manual (Page 475)

IP Addressing Commands 475
Parameter Description
This command does not require a parameter description.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC mode
User Guidelines
This command has no user guidelines.
The command provides the following information.
Example
console#show ip address-conflict
Address Conflict Detection Status...Conflict Detected
Last Conflicting IP Address.........10.131.12.56
Last Conflicting MAC Address........00:01:02:04:5A:BC
Time Since Conflict Detected........5 days 2 hrs 6 mins 46 secs
console#show ip address-conflict
Term Description
Address Conflict
Detection Status
Whether the switch has detected an address conflict on any IP
address. Set to Conflict Detected if detected, No Conflict
Detected otherwise.
Last Conflicting IP
Address
The IP address that was last detected as conflicting on any
interface.
Last Conflicting
MAC Address
The MAC Address of the conflicting host that was last detected
on any interface.
Time Since Conflict
Detected
The time in days, hours, minutes, and seconds since the last
address conflict was detected.
2CSPC4.XModular-SWUM200.book Page 475 Thursday, March 10, 2011 11:18 AM