Examples, Username unlock – Dell POWEREDGE M1000E User Manual
Page 241
AAA Commands
241
Examples
console(config)#username test password xxxxPassword
level 1 encrypted override-complexity-check
console(config)#username test password xxxxPassword
level 1 override-complexity-check
console(config)#username test password testPassword
encrypted override-complexity-check
console(config)#username test password testPassword
override-complexity-check
username unlock
Use the username unlock command in Global Configuration mode to unlock
a locked user account. Only a user with read/write access can re-activate a
locked user account.
Reason behind the failure
1
Exceeds Minimum Length of a Password.
Password should be in the range of 8-64
characters in length. Set minimum password
length to 0 by using the passwords min-length
0 command.
2
Password should contain Minimum
<number> uppercase-letters,
<number> lowercase-letters, <number>
numeric numbers,
<number> special characters and
<number> character classes and
Maximum limit of <number> consecutive
alphabetic and numeric
characters.
Maximum repetition of <number>
alphabetic and number characters.
3
Password should not contain the
keywords <keyword1>, <keyword2>
and <keyword3> in any form (reversed,
substring or case-insensitive).
Message Type
Message Description
2CSPC4.XModular-SWUM200.book Page 241 Thursday, March 10, 2011 11:18 AM