Dell POWEREDGE M1000E - Manual (Page 1377)

Line Commands 1373
68
Line Commands
This chapter explains the following commands:
Authentication commands related to line configuration mode are in AAA
Commands.
exec-timeout
Use the exec-timeout command in Line Configuration mode to set the
interval that the system waits for user input before timeout. To restore the
default setting, use the no form of this command.
Syntax
exec-timeout minutes [ seconds ]
no exec-timeout
• minutes — Integer that specifies the number of minutes. (Range:
0–65535)
• seconds — Additional time intervals in seconds. (Range: 0–59)
Default Configuration
The default configuration is 10 minutes.
Command Mode
Line Configuration mode
User Guidelines
To specify no timeout, enter the exec-timeout 0 command.
exec-timeout line
history show line
history size speed
2CSPC4.XModular-SWUM200.book Page 1373 Thursday, March 10, 2011 11:18 AM