Dell POWEREDGE M1000E - Manual (Page 276)

276 Address Table Commands
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
In this example, the mac address table entry for 0000.E26D.2C2A is
displayed.
console#show mac address-table address 0000.E26D.2C2A
Vlan Mac Address Type Port
---- -------------- -------- -------------
1 0000.E26D.2C2A Dynamic 1/0/1
show mac address-table count
Use the show mac address-table count command in User EXEC or Privileged
EXEC mode to display the number of addresses present in the Forwarding
Database.
Syntax
show mac address-table count [vlan vlan-id | interface interface-id ]
interface-id Display information for a specific interface. Valid interfaces
include physical ports and port channels.
vlan-id Display entries for the specific VLAN only. The range is 1 to
4093.
Parameter Description
2CSPC4.XModular-SWUM200.book Page 276 Thursday, March 10, 2011 11:18 AM