Dell POWEREDGE M1000E - Manual (Page 432)

432 GVRP Commands
console(config-if-1/0/8)#gvrp registration-forbid
gvrp vlan-creation-forbid
Use the gvrp vlan-creation-forbid command in Interface Configuration mode
to disable dynamic VLAN creation. To disable dynamic VLAN creation, use
the no form of this command.
Syntax
gvrp vlan-creation-forbid
no gvrp vlan-creation-forbid
Default Configuration
By default, dynamic VLAN creation is enabled.
Command Mode
Interface Configuration (gigabitethernet, port-channel, tengigabitethernet)
mode
User Guidelines
This command has no user guidelines.
Example
The following example disables dynamic VLAN creation on port 1/0/8.
console(config)#interface gigabitethernet 1/0/8
console(config-if-1/0/8)#gvrp vlan-creation-forbid
show gvrp configuration
Use the show gvrp configuration command in Privileged EXEC mode to
display GVRP configuration information. Timer values are displayed. Other
data shows whether GVRP is enabled and which ports are running GVRP.
2CSPC4.XModular-SWUM200.book Page 432 Thursday, March 10, 2011 11:18 AM