Dell POWEREDGE M1000E - Manual (Page 420)

420 Ethernet CFM Commands
Syntax
show ethernet cfm maintenance-points local {level 0-7 | interface interface-
id | domain domain-name }
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC
User Guidelines
This command has no user guidelines.
Example
show ethernet cfm maintenance-points local level 1
---- ----- ---- ---- ------ ----- -------- ------ ----------- ---------
MPID Level Type VLAN Port Dire- CC MEP- Operational MAC
ction Transmit Active Status
---- ----- ---- ---- ------ ----- -------- ------ ----------- ---------
1 1 MEP 10 1/0/1 UP Enabled True 00:02:bc:02:02:02
----- ---- ------ -----------------
Level Type Port MAC
----- ---- ------ -----------------
show ethernet cfm maintenance-points remote
Use the show ethernet cfm maintenance-points remote command in
Privileged EXEC mode to display the configured remote maintenance points.
Parameter Description
domain Name of the maintenance domain (an alphanumeric string of
up to 43 characters in length).
level Maintenance association level
interface-id Show all MPs associated with the interface.
2CSPC4.XModular-SWUM200.book Page 420 Thursday, March 10, 2011 11:18 AM