Show ipv6 ospf virtual-link brief, Syntax, Default configuration – Dell POWEREDGE M1000E User Manual
Page 1201: Command mode, User guidelines, Example, Show ipv6 ospf virtual, Link brief
OSPFv3 Commands
1201
Metric......................................... 10
Neighbor State................................. Full
show ipv6 ospf virtual-link brief
Use the show ipv6 ospf virtual-link brief command in Privileged EXEC mode
to display the OSPFV3 Virtual Interface information for all areas in the
system.
Syntax
show ipv6 ospf virtual-link brief
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Example
The following example displays the OSPF stub table.
console(config)#show ipv6 ospf virtual-link brief
Hello
Dead
Retransmit Transit
Area ID
Neighbor
Interval
Interval
Interval
Delay
----------- ----------- ---------- ---------- ---------- --------
2CSPC4.XModular-SWUM200.book Page 1201 Thursday, March 10, 2011 11:18 AM