Dell POWEREDGE M1000E - Manual (Page 664)

664 RADIUS Commands
User Guidelines
This command has no user guidelines.
Example
The following example sets the authentication and encryption key for all
Radius communications between the device and the Radius server to “dell-
server .”
console(config)#radius-server key dell-server
radius-server retransmit
Use the radius-server retransmit command in Global Configuration mode to
specify the number of times the Radius client will retransmit requests to the
Radius server. To reset the default configuration, use the no form of this
command.
Syntax
radius-server retransmit retries
no radius-server retransmit
• retries — Specifies the retransmit value. (Range: 1–10)
Default Configuration
The default is 3 attempts.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example configures the number of times the Radius client
attempts to retransmit requests to the Radius server to 5 attempts.
console(config)#radius-server retransmit 5
2CSPC4.XModular-SWUM200.book Page 664 Thursday, March 10, 2011 11:18 AM