Default configuration, Command mode, User guidelines – Dell POWEREDGE M1000E User Manual
Page 865: Example, Show ip dvmrp nexthop, Syntax
Advertising
DVMRP Commands
865
Default Configuration
This command has no default condition.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the neighbor information for DVMRP.
console(config)#show ip dvmrp neighbor
No neighbors available.
show ip dvmrp nexthop
Use the show ip dvmrp nexthop command in Privileged EXEC mode to
display the next hop information on outgoing interfaces for routing multicast
datagrams.
Syntax
show ip dvmrp nexthop
Default Configuration
This command has no default condition.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
2CSPC4.XModular-SWUM200.book Page 865 Thursday, March 10, 2011 11:18 AM
Advertising