Dell POWEREDGE M1000E - Manual (Page 157)

Command Groups 157
set description Associates a text description with a switch in
the stack.
SG
slot Configures a slot in the system. GC
show banner Displays banner information. PE
show boot-version Displays the boot image version details. UE
show checkpoint
statistics
Displays the statistics for the checkpointing
process.
PE
show cut-through mode Show the cut-through mode on the switch. PE
show interfaces
advanced firmware
Displays the firmware revision of the PHY for a
port.
PE
show ip interface out-of-
band
Disables DHCP/BOOTP on the OOB port. PE
show memory cpu Checks the total and available RAM space on
the switch.
PE
show nsf Shows non-stop forwarding status. PE
show power-usage-
history
Shows the history of unit power consumption
for the unit specified in the command and total
stack power consumption.
PE
show process cpu Checks the CPU utilization for each process
currently running on the switch.
PE
show sessions Displays a list of the open telnet sessions to
remote hosts.
PE
show slot Displays information about all the slots in the
system or for a specific slot.
UE
show supported
cardtype
Displays information about all card types
supported in the system.
UE
show supported
switchtype
Displays information about all supported switch
types.
UE
show switch Displays information about the switch status. UE
show system Displays system information. UE
show system id Displays the service ID information. UE
Command Description Mode a
2CSPC4.XModular-SWUM200.book Page 157 Thursday, March 10, 2011 11:18 AM