Command mode, User guidelines, Example – Dell POWEREDGE M1000E User Manual
Page 1471: Show sflow agent, Syntax, Default configuration
Sflow Commands
1467
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
This command has no user guidelines.
Example
console(config-if-1/0/15)#sflow 1 sampler 1500 50
show sflow agent
Use the show sflow agent command to display the sflow agent information.
Syntax
show sflow agent
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
The following fields are displayed:
sFlow Version
Uniquely identifies the version and implementation of this
MIB. The version string must have the following structure: MIB
Version; Organization; Software Revision where:
MIB Version: 1.3, the version of this MIB.
Organization: Dell Corp.
Revision: 1.0
IP Address
The IP address associated with this agent.
2CSPC4.XModular-SWUM200.book Page 1467 Thursday, March 10, 2011 11:18 AM