Dell POWEREDGE M1000E - Manual (Page 214)

214 Using the CLI
Monitoring Traps from CLI
It is possible to connect to the CLI session and monitor the events or faults
that are being sent as traps from the system. This feature is equivalent to the
alarm-monitoring window in a typical network management system. The user
enables events or monitor traps from the CLI by entering the command
logging console. Traps generated by the system are dumped to all CLI
sessions that have requested monitoring mode to be enabled. The no logging
console command disables trap monitoring for the session. By default,
console logging is enabled.
2CSPC4.XModular-SWUM200.book Page 214 Thursday, March 10, 2011 11:18 AM