Parameter description, Default configuration, Command mode – Dell POWEREDGE M1000E User Manual
Page 957: User guidelines, Example
Advertising
IPv6 PIM Commands
957
Parameter Description
Default Configuration
There is no default configuration for this command.
Command Mode
User EXEC, Privileged EXEC modes
User Guidelines
There are no user guidelines for this command. Field descriptions are shown
in the following table.
Example
(console) # show ipv6 pim rp mapping 192.168.10.1
RP Address
2001:db8:85a3:0:0:8a2e:370:7334
Group Address
ff1e:abcd:def1::0
Group Mask
/24
Origin
Static
(switch) #show ipv6 pim rp mapping
Parameter
Description
rp-address
IP address of the RP
Field
Description
RP Address
Address of the RP
Group Address
Address of the multicast group
Origin
Origin from where this group mapping is learned
2CSPC4.XModular-SWUM200.book Page 957 Thursday, March 10, 2011 11:18 AM
Advertising