Dell POWEREDGE M1000E - Manual (Page 130)

130 Command Groups
area virtual-link
retransmit-interval
Configures the retransmit interval for the OSPF
virtual interface on the virtual interface identified
by the area ID and neighbor ID.
ROSPF
area virtual-link
transmit-delay
Configures the transmit delay for the OSPF
virtual interface on the virtual interface identified
by the area ID and neighbor ID.
ROSPF
auto-cost Allows user to change the reference bandwidth
used in computing link cost.
ROSPF
bandwidth Allows user to change the bandwidth used in
computing link cost.
IC
capability opaque Enables Opaque Capability on the router. RC
clear ip ospf Resets specific OSPF states. PE
compatible rfc1583 Enables OSPF 1583 compatibility. ROSPF
default-information
originate
Controls the advertisement of default routes. ROSPF
default-metric Sets a default for the metric of distributed routes. ROSPF
distance ospf Sets the route preference value of OSPF in the
router.
ROSPF
distribute-list out Specifies the access list to filter routes received
from the source protocol.
ROSPF
enable Resets the default administrative mode of OSPF
in the router (active).
ROSPF
exit-overflow-interval Configures the exit overflow interval for OSPF. ROSPF
external-lsdb-limit Configures the external LSDB limit for OSPF. ROSPF
ip ospf area Enables OSPFv2 and sets the area ID of an
interface.
IC
ip ospf authentication Sets the OSPF Authentication Type and Key for
the specified interface.
IC
ip ospf cost Configures the cost on an OSPF interface. IC
ip ospf dead-interval Sets the OSPF dead interval for the specified
interface.
IC
Command Description Mode a
2CSPC4.XModular-SWUM200.book Page 130 Thursday, March 10, 2011 11:18 AM