Ipv6 multicast commands, Ipv6 pimsm (global config), Syntax – Dell POWEREDGE M1000E User Manual
Page 1049: Default configuration, Command mode
Advertising
IPv6 Multicast Commands
1049
53
IPv6 Multicast Commands
This chapter explains the following commands:
ipv6 pimsm (Global config)
Use the ipv6 pimsm command to administratively enable PIMSM for IPv6
multicast routing. Use the "no" form of this command to disable PIMSM for
IPv6.
Syntax
ipv6 pimsm
no ipv6 pimsm
Default Configuration
IPv6 PIMSM is disabled on the router by default.
Command Mode
Global Configuration mode
ipv6 pimsm (VLAN Interface config) ipv6 pimsm spt-threshold
ipv6 pimsm bsr-border
ipv6 pimsm join-prune-interval
2CSPC4.XModular-SWUM200.book Page 1049 Thursday, March 10, 2011 11:18 AM
Advertising