Dell POWEREDGE M1000E - Manual (Page 972)

972 IPv6 Routing Commands
Command Mode
Interface Configuration (VLAN, Tunnel, Loopback) mode
User Guidelines
This command has no user guidelines.
Example
The following example sets the maximum transmission unit (MTU) size, in
bytes, of IPv6 packets.
console(config)#interface vlan 15
console(config-if-vlan15)#ipv6 mtu 1300
ipv6 nd dad attempts
Use the ipv6 nd dad attempts command in Interface Configuration mode to
set the number of duplicate address detection probes transmitted while doing
neighbor discovery. Duplicate address detection verifies that an IPv6 address
on an interface is unique.
Syntax
ipv6 nd dad attempts < value >
no ipv6 nd dad attempts
Parameter Description
Default Configuration
The default value for attempts is 1.
Command Mode
Interface Configuration (VLAN, Tunnel, Loopback) mode
Parameter Description
value Probes transmitted. (Range: 0-600)
2CSPC4.XModular-SWUM200.book Page 972 Thursday, March 10, 2011 11:18 AM