Dell POWEREDGE M1000E - Manual (Page 342)

342 Dynamic ARP Inspection Commands
Default Configuration
There are no ARP ACLs created by default.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(config)#arp access-list tier1
clear ip arp inspection statistics
Use the clear ip arp inspection statistics command in Privileged EXEC mode
to reset the statistics for Dynamic Address Resolution Protocol (ARP)
inspection on all VLANs.
Syntax
clear ip arp inspection statistics
Parameter Description
This command does not require a parameter description.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
2CSPC4.XModular-SWUM200.book Page 342 Thursday, March 10, 2011 11:18 AM