Dell POWEREDGE M1000E - Manual (Page 885)

IGMP Commands 885
Startup Query Interval (secs) ................. 31
Startup Query Count............................ 2
Last Member Query Interval (1/10 of a second).. 10
Last Member Query Count........................ 2
show ip igmp membership
Use the show ip igmp membership command in Privileged EXEC mode to
display the list of interfaces that have registered in the multicast group. If
detail is specified, this command displays detailed information about the
listed interfaces.
Syntax
show ip igmp membership [ groupaddr ] [detail]
• groupaddr — Group IP address
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC modes
User Guidelines
This command has no user guidelines.
Examples
The following examples display the list of interfaces that have registered in
the multicast group at IP address 224.5.5.5, the latter in detail mode.
console#show ip igmp interface membership 224.5.5.5
console(config)#show ip igmp interface membership 224.5.5.5 detail
2CSPC4.XModular-SWUM200.book Page 885 Thursday, March 10, 2011 11:18 AM