Show classofservice ip-dscp-mapping, Syntax, Default configuration – Dell POWEREDGE M1000E User Manual
Page 637: Command mode, User guidelines, Example, Show classofservice ip, Dscp-mapping
Advertising
QoS Commands
637
show classofservice ip-dscp-mapping
Use the show classofservice ip-dscp-mapping command in Privileged EXEC
mode to display the current IP DSCP mapping to internal traffic classes for a
specific interface.
Syntax
show classofservice ip-dscp-mapping
• Command is supported only globally.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
Example
console#show classofservice ip-dscp-mapping
IP DSCP
Traffic Class
-------------
-------------
0(be/cs0
1
1
1
2
1
3
1
4
1
5
1
6
1
7
1
2CSPC4.XModular-SWUM200.book Page 637 Thursday, March 10, 2011 11:18 AM
Advertising