Ipv6 nd ra-interval, Syntax, Default configuration – Dell POWEREDGE M1000E User Manual

Page 977: Command mode, User guidelines, Example

Advertising
background image

IPv6 Routing Commands

977

console(config)#interface vlan 11

console(config-if-vlan11)#ipv6 nd prefix 2020:1::1/64

ipv6 nd ra-interval

Use the ipv6 nd ra-interval command in Interface Configuration mode to set

the transmission interval between router advertisements.

Syntax

ipv6 nd ra-interval

maximum

minimum

no ipv6 nd ra-interval

maximum

— The maximum interval duration (Range: 4–1800 seconds).

minimum

— The minimum interval duration (Range: 3 – (0.75 *

maximum) seconds).

Default Configuration

600 is the default value for

seconds

.

Command Mode

Interface Configuration (VLAN, Tunnel, Loopback) mode

User Guidelines

The minimum interval cannot be larger than 75% of the maximum interval.

Example

The following example sets the transmission interval between router

advertisements at 1000 seconds.

console(config)#interface vlan 15

console(config-if-vlan15)#ipv6 nd ra-interval 1000

2CSPC4.XModular-SWUM200.book Page 977 Thursday, March 10, 2011 11:18 AM

Advertising