Syntax, Parameter description, Default configuration – Dell POWEREDGE M1000E User Manual
Page 649: Command mode, User guidelines, Example
QoS Commands
649
Syntax
show policy-map interface {gigabithethernet | tengigabitethernet
unit/slot/port
} {in|out}
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the statistics information for port 1/0/1.
console#show policy-map interface 1/0/1 in
Interface..................................... 1/0/1
Operational Status............................ Down
Policy Name................................... DELL
Interface Summary:
Class Name.................................... murali
In Discarded Packets.......................... 0
Class Name.................................... test
In Discarded Packets.......................... 0
Class Name................................... DELL1
Parameter
Description
in
Show inbound service policies.
out
Show outbound service policies.
2CSPC4.XModular-SWUM200.book Page 649 Thursday, March 10, 2011 11:18 AM