Example, Ip netdirbcast, Syntax – Dell POWEREDGE M1000E User Manual

Page 920: Default configuration, Command mode, User guidelines

Advertising
background image

920

IP Routing Commands

Example

The following example defines 1480 as the MTU for VLAN 15.

console(config)#interface vlan 15

console(config-if-vlan15)#ip mtu 1480

ip netdirbcast

Use the ip netdirbcast command in Interface Configuration mode to enable

the forwarding of network-directed broadcasts. When enabled, network

directed broadcasts are forwarded. When disabled they are dropped. Use the

no form of the command to disable the broadcasts.

Syntax

ip netdirbcast
no ip netdirbcast

Default Configuration

Disabled is the default configuration.

Command Mode

Interface Configuration (VLAN) mode

User Guidelines

This command has no user guidelines.

Example

The following example defines the IP address and subnet mask for VLAN 15.

console(config)#interface vlan 15

console(config-if-vlan15)#ip netdirbcast

2CSPC4.XModular-SWUM200.book Page 920 Thursday, March 10, 2011 11:18 AM

Advertising