Syntax, Default configuration, Command mode – Dell POWEREDGE M1000E User Manual
Page 493: User guidelines, Example, Ipv6 mld snooping (vlan)
Advertising
IPv6 MLD Snooping Commands
493
Syntax
ipv6 mld snooping
no ipv6 mld snooping
Default Configuration
MLD Snooping is disabled.
Command Mode
Interface Configuration (gigabitethernet, port-channel, tengigabitethernet)
mode.
User Guidelines
There are no user guidelines for this command.
Example
console(config-if-4/0/1)#ipv6 mld snooping
ipv6 mld snooping (VLAN)
The ipv6 mld snooping (VLAN) command enables MLD Snooping on a
particular VLAN and enables MLD snooping on all interfaces participating in
a VLAN.
Syntax
ipv6 mld snooping
vlan-id
no ipv6 mld snooping
vlan-id
•
vlan-id
— Specifies a VLAN ID value.
Default Configuration
MLD Snooping is disabled.
Command Mode
VLAN Database mode.
2CSPC4.XModular-SWUM200.book Page 493 Thursday, March 10, 2011 11:18 AM
Advertising