Dell POWEREDGE M1000E - Manual (Page 807)

ARP Commands 807
console#clear arp-cache gateway
clear arp-cache management
Use the clear arp-cache management command to clear all entries that show
as management arp entries in the show arp command.
Syntax
clear arp-cache management
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
In the example below, out-of-band management entries are shown, i.e. those
from the service port.
console#show arp
Age Time (seconds)............................. 1200
Response Time (seconds).................... 1
Retries................................................... 4
Cache Size............................................ 6144
Dynamic Renew Mode ....................... Disable
Total Entry Count Current / Peak ...... 0 / 0
Static Entry Count Configured / Active / Max .. 0 / 0 / 128
2CSPC4.XModular-SWUM200.book Page 807 Thursday, March 10, 2011 11:18 AM