Syntax, Parameter description, Default configuration – Dell POWEREDGE M1000E User Manual
Page 278: Command mode, User guidelines, Example
278
Address Table Commands
Syntax
show mac address-table dynamic [address
mac-address
] [interface
interface-
id
] [vlan
vlan-id
]
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
In this example, all dynamic entries in the mac address-table are displayed.
console#show mac address-table dynamic
Aging time is 300 Sec
Vlan Mac Address Type Port
---- -------------- ------- -------------
1 0000.0001.0000 Dynamic gi1/0/1
1 0000.8420.5010 Dynamic gi1/0/1
1 0000.E26D.2C2A Dynamic gi1/0/1
1 0000.E89A.596E Dynamic gi1/0/1
Parameter
Description
mac-address
A MAC address with the format xxxx.xxxx.xxxx.
interface-id
Display information for a specific interface. Valid interfaces
include physical ports and port channels.
vlan-id
Display entries for the specific VLAN only. The range is 1 to
4093.
2CSPC4.XModular-SWUM200.book Page 278 Thursday, March 10, 2011 11:18 AM