Dell POWEREDGE M1000E - Manual (Page 528)

528 Link Dependency Commands
• intf-list — List of Ethernet interfaces in unit/slot/port format. Separate
nonconsecutive ports with a comma and no spaces. Use a hyphen to
designate the range of ports. (Range: Valid Ethernet interface list or range)
Default Configuration
This command has no default configuration.
Command Mode
Link Dependency mode
User Guidelines
No specific guidelines
Example
console(config-depend-1)#add tengigabitethernet 1/0/1
add port-channel
Use this command to add member port channels to the dependency list.
Syntax
add port-channel intf-list
no add port-channel port channel list
• intf-list — List of port-channel numbers. Separate nonconsecutive port-
channels with a comma and no spaces. Use a hyphen to designate the
range of port-channels. (Range: Valid port-channel list or range)
• port-channel-list — List of port-channel interfaces. Separate
nonconsecutive ports with a comma and no spaces. Use a hyphen to
designate the range of ports. (Range: Valid port-channel interface list or
range)
Default Configuration
This command has no default configuration.
2CSPC4.XModular-SWUM200.book Page 528 Thursday, March 10, 2011 11:18 AM