Dell POWEREDGE M1000E - Manual (Page 485)

IPv6 Access List Commands 485
Action......................................... permit
Protocol....................................... 255(ipv6)
Source IP Address.............................. 2001:DB8::/32
The command output provides the following information:
Field Description
Rule Number The ordered rule number identifier defined within the IPv6 ACL.
Action
Displays the action associated with each rule. The possible values are
Permit or Deny.
Match All Indicates whether this access list applies to every packet. Possible
values are True or False.
Protocol This displays the protocol to filter for this rule.
Source IP
Address
This displays the source IP address for this rule.
Source L4
Port Keyword
This field displays the source port for this rule.
Destination
IP Address
This displays the destination IP address for this rule.
Destination
L4 Port
Keyword
This field displays the destination port for this rule.
IP DSCP This field indicates the value specified for IP DSCP.
Flow Label This field indicates the value specified for IPv6 Flow Label.
Log Displays when you enable logging for the rule.
Assign Queue Displays the queue identifier to which packets matching this rule are
assigned.
Mirror
Interface
Displays the interface to which packets matching this rule are copied.
Redirect
Interface
Displays the interface to which packets matching this rule are
forwarded.
2CSPC4.XModular-SWUM200.book Page 485 Thursday, March 10, 2011 11:18 AM