Boot system, Syntax, Parameter description – Dell POWEREDGE M1000E User Manual
Page 1342: Default configuration, Command mode, User guidelines
Advertising
1340
Configuration and Image File Commands
boot system
Use the boot system command in Privileged EXEC mode to specify the
system image that the device loads at startup.
Syntax
boot system [unit-id][image1 | image2]
• image1 | image2 — Image file.
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
Use the show bootvar command to find out which image is the active image.
Parameter
Description
image1
Marks the given image as active for subsequent reboots.
image2
Marks the given image as active for subsequent reboots.
unit
Unit to be used for this operation. If absent, command executes
on this node.
2CSPC4.XModular-SWUM200.book Page 1340 Thursday, March 10, 2011 11:18 AM
Advertising