Show ipv6 pimsm neighbor, Syntax, Default configuration – Dell POWEREDGE M1000E User Manual
Page 1061: Command mode, User guidelines, Example
IPv6 Multicast Commands
1061
IP Address.....................................
FE80::2FF:EDFF:FED0:2/128
Hello Interval (secs).......................... 30
Join Prune Interval (secs)..................... 60
Neighbor Count ................................ 0
Designated Router..............................
FE80::2FF:EDFF:FED0:2
DR Priority.................................... 1
BSR Border.....................................
Disabled
show ipv6 pimsm neighbor
Use the show ipv6 pimsm neighbor command to display IPv6 PIMSM
neighbors learned on the routing interfaces.
Syntax
show ipv6 pimsm neighbor [ all | interface vlan
vlan-id
]
•
vlan-id
—A valid VLAN ID value.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
console#show ipv6 pimsm neighbor all
Slot/Port...................................... vlan
6
2CSPC4.XModular-SWUM200.book Page 1061 Thursday, March 10, 2011 11:18 AM