Command mode, User guidelines, Example – Dell POWEREDGE M1000E User Manual
Page 1294: Show captive-portal user, Syntax, Default configuration
1292
Captive Portal Commands
Command Mode
Captive Portal Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
console(config-CP)#no user 1
show captive-portal user
Use the show captive-portal user command to display all configured users or a
specific user in the captive portal local user database.
Syntax
show captive-portal user [ user-id ]
•
user-id
—User ID (Range: 1–128).
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
console#show captive-portal user
Session
User ID User Name Timeout
Group ID
Group
Name
------- --------------------- ------- ------------ --------
----
2CSPC4.XModular-SWUM200.book Page 1292 Thursday, March 10, 2011 11:18 AM