Default configuration, Command mode, User guidelines – Dell POWEREDGE M1000E User Manual
Page 1258: Show ip vrrp interface, Syntax, Syntax description
1258
Virtual Router Redundancy Protocol Commands
no vrrp
vrid
accept-mode
• vrid — Virtual router identification. (Range: 1-255)
Default Configuration
The default configuration is disabled.
Command Mode
Interface Configuration (VLAN) mode.
User Guidelines
This command has no user guidelines.
show ip vrrp interface
Use the show ip vrrp interface command in User EXEC or Privileged EXEC
mode to display the configured value for Accept Mode.
Syntax
show ip vrrp interface
interface-id
vrid
Syntax Description
Default Configuration
The command has no default configuration.
Command Mode
User EXEC, Privileged EXEC mode.
Parameter
Description
interface-id
Any valid routing interface. See Interface Naming Conventions
for interface representation.
vrid
The virtual router identifier. (Range: 1-255)
2CSPC4.XModular-SWUM200.book Page 1258 Thursday, March 10, 2011 11:18 AM