Dell POWEREDGE M1000E - Manual (Page 330)

330 DHCP Snooping Commands
User Guidelines
There are no user guidelines for this command.
Example
The following example configures the storage location of the snooping
database as local.
console(config)#ip dhcp snooping database local
The following example configures the storage location of the snooping
database as remote.
console(config)#ip dhcp snooping database
tftp://10.131.11.1/db.txt
ip dhcp snooping database write-delay
Use the ip dhcp snooping database write-delay command to configure the
interval in seconds at which the DHCP Snooping database will be stored in
persistent storage. Use the “no” form of this command to reset the write delay
to the default.
Syntax
ip dhcp snooping database write-delay seconds
no ip dhcp snooping database write-delay
Parameter Description
Default Configuration
The write delay is 300 seconds by default.
Command Mode
Global Configuration mode
Parameter Description
seconds The write delay (Range: 15–86400 seconds).
2CSPC4.XModular-SWUM200.book Page 330 Thursday, March 10, 2011 11:18 AM