Dell POWEREDGE M1000E - Manual (Page 387)

Ethernet Configuration Commands 387
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the status for all configured interfaces.
console#show interfaces status
Port Type Duplex Speed Neg Link Flow
Control
State Status
--------- ------------------------------ ------ ------- ---- ----- ------
Gi1/0/1 Gigabit - Level N/A Unknown Auto Down Inactive
Gi1/0/2 Gigabit - Level N/A Unknown Auto Down Inactive
Gi1/0/3 Gigabit - Level N/A Unknown Auto Down Inactive
Gi1/0/4 Gigabit - Level N/A Unknown Auto Down Inactive
Gi1/0/5 Gigabit - Level N/A Unknown Auto Down Inactive
Gi1/0/6 Gigabit - Level N/A Unknown Auto Down Inactive
Gi1/0/7 Gigabit - Level N/A Unknown Auto Down Inactive
Gi1/0/8 Gigabit - Level N/A Unknown Auto Down Inactive
Gi1/0/9 Gigabit - Level N/A Unknown Auto Down Inactive
Gi1/0/10 Gigabit - Level N/A Unknown Auto Down Inactive
Gi1/0/11 Gigabit - Level N/A Unknown Auto Down Inactive
Gi1/0/12 Gigabit - Level N/A Unknown Auto Down Inactive
Gi1/0/13 Gigabit - Level N/A Unknown Auto Down Inactive
Gi1/0/14 Gigabit - Level N/A Unknown Auto Down Inactive
Gi1/0/15 Gigabit - Level N/A Unknown Auto Down Inactive
Gi1/0/16 Gigabit - Level N/A Unknown Auto Down Inactive
Gi1/0/17 Gigabit - Level N/A Unknown Auto Down Inactive
Gi1/0/18 Gigabit - Level N/A Unknown Auto Down Inactive
Gi1/0/19 Gigabit - Level N/A Unknown Auto Down Inactive
--More-- or (q)uit
Gi1/0/20 Gigabit - Level N/A Unknown Auto Down Inactive
Gi1/0/21 Gigabit - Level Full 1000 Auto Up Active
2CSPC4.XModular-SWUM200.book Page 387 Thursday, March 10, 2011 11:18 AM