Parameter ranges, Command mode, Usage guidelines – Dell POWEREDGE M1000E User Manual
Page 1600: Default value, Example, Ip telnet port, Syntax, Default configuration
Advertising
1596
Telnet Server Commands
Parameter Ranges
Not applicable
Command Mode
Global Configuration
Usage Guidelines
No specific guidelines.
Default Value
This feature is enabled by default.
Example
console#configure
console(config)#ip telnet server disable
console(config)# no ip telnet server disable
ip telnet port
The ip telnet port command is used to configure the Telnet service port
number on the switch.
Syntax
ip telnet port
port number
•
port number
— Telnet service port number (Range: 1–65535)
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration
Usage Guidelines
No specific guidelines.
2CSPC4.XModular-SWUM200.book Page 1596 Thursday, March 10, 2011 11:18 AM
Advertising