Show ip dhcp snooping binding, Syntax, Default configuration – Dell POWEREDGE M1000E User Manual
Page 335: Command mode, User guidelines, Example
DHCP Snooping Commands
335
--------- -------- ----------------
1/0/1 Yes No
1/0/2 No Yes
1/0/3 No Yes
1/0/4 No No
1/0/6 No No
show ip dhcp snooping binding
Use the show ip dhcp snooping binding command to display the DHCP
snooping binding entries.
Syntax
show ip dhcp snooping binding [{ static | dynamic } ] [ interface
interface-
id
] [ vlan
vlan-id
]
• static | dynamic—Use these keywords to filter by static or dynamic
bindings.
• interface-id—The interface for which to show bindings.
• vlan-id—The number of the VLAN for which to show bindings.
Default Configuration
There is no default configuration for this command.
Command Mode
User EXEC, Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
console#show ip dhcp snooping binding
Total number of bindings: 2
2CSPC4.XModular-SWUM200.book Page 335 Thursday, March 10, 2011 11:18 AM