Dell POWEREDGE M1000E - Manual (Page 1603)

Terminal Length Commands 1599
82
Terminal Length Commands
This chapter provides information about terminal length commands.
terminal length
Use the terminal length command to set the terminal length. Use the no
form of the command to reset the terminal length to the default.
Syntax
terminal length value
no terminal length
• value — The length in number of lines. Range: 0–512
Default Configuration
This default value is 24.
Command Mode
Privileged EXEC mode
User Guidelines
Setting the terminal length to 0 disables paging altogether. It is
recommended that the terminal length either be set to 0 or a value larger than
4 as terminal lengths in the range of 1 to 4 may give odd output due to
prompting.
Example
console#terminal length 50
2CSPC4.XModular-SWUM200.book Page 1599 Thursday, March 10, 2011 11:18 AM