Dell POWEREDGE M1000E - Manual (Page 1541)

System Management Commands 1537
Example
console(config)# banner motd “IMPORTANT: There is a
power shutdown at 23:00hrs today, duration 1 hr 30
minutes.”
When the MOTD banner is executed, the following displays:
IMPORTANT: There is a power shutdown at 23:00hrs today, duration 1 hr 30
minutes.
banner motd acknowledge
The banner displayed on the console must be acknowledged if banner motd
acknowledge is executed. Enter "y" or "n" to continue to the login prompt. If
"n" is entered, the session is terminated and no further communication is
allowed on that session. However, serial connection will not get terminated if
‘y’ is not entered. Use the no banner motd acknowledge command to disable
banner acknowledge.
Syntax
banner motd acknowledge
no banner motd acknowledge
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
console(config)# banner motd “There is a power
shutdown at 23:00hrs today, duration 1 hr 30 minutes.”
console(config)# banner motd acknowledge
2CSPC4.XModular-SWUM200.book Page 1537 Thursday, March 10, 2011 11:18 AM