Dell POWEREDGE M1000E - Manual (Page 813)

DHCP Server and Relay Agent Commands 813
Syntax
ip dhcp pool [ pool-name ]
no ip dhcp pool [ pool-name ]
Parameter Description
Default Configuration
The command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
PowerConnect supports dynamic, automatic, and manual address
assignment. Dynamic address assignment leases an address to the client for a
limited period of time. Automatic assignment assigns a permanent address to
a client. Manual (static) assignment simply conveys an address assigned by
the administrator to the client.
In DHCP Pool Configuration mode, the administrator can configure the
address space and other parameters to be supplied to DHCP clients. By
default, the DHCP server assumes that all addresses specified are available for
assignment to clients. Use the ip dhcp excluded-address command in Global
Configuration mode to specify addresses that should never be assigned to
DHCP clients.
To configure a dynamic DHCP address pool, configure the following pool
properties using the listed DHCP pool commands:
• Address pool subnet and mask – network
• Client domain name – domain-name
Parameter Description
pool-name The name of an existing or new DHCP address pool. The pool
name can be up to 31 characters in length and can contain the
following characters: a-z, A-Z, 0-9, ’-’, ’_’, ’ ’. Enclose the entire
pool name in quotes if an embedded blank is to appear in the
pool name.
2CSPC4.XModular-SWUM200.book Page 813 Thursday, March 10, 2011 11:18 AM