Default configuration, Command mode, User guidelines – Dell POWEREDGE M1000E User Manual
Page 722: Example, Interface range vlan, Syntax, E interface range vlan, Interface range, Vlan
722
VLAN Commands
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example configures the VLAN 1 IP address of 131.108.1.27 and
subnet mask 255.255.255.0.
console(config)#interface vlan 1
console(config-vlan)#ip address 131.108.1.27
255.255.255.0
interface range vlan
Use the interface range vlan command in Global Configuration mode to
execute a command on multiple VLANs at the same time.
Syntax
interface range vlan {
vlan-range
|
all
}
•
vlan-range
— A list of valid VLAN IDs to add. Separate nonconsecutive
VLAN IDs with a comma and no spaces; use a hyphen to designate a range
of IDs. (Range: 2–4093)
•
all — All existing static VLANs.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
2CSPC4.XModular-SWUM200.book Page 722 Thursday, March 10, 2011 11:18 AM