Dell POWEREDGE M1000E - Manual (Page 1380)

1376 Line Commands
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Examples
The following example enters Line Configuration mode to configure Telnet.
console(config)#line telnet
console(config-line)#
show line
Use the show line command in User EXEC mode to display line parameters.
Syntax
show line [console | telnet | ssh]
• console — Console terminal line.
•
telnet — Virtual terminal for remote console access (Telnet).
• ssh — Virtual terminal for secured remote console access (SSH).
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
This command has no user guidelines.
2CSPC4.XModular-SWUM200.book Page 1376 Thursday, March 10, 2011 11:18 AM