Default configuration, Command mode, User guidelines – Dell POWEREDGE M1000E User Manual
Page 749: Example, Vlan database, Syntax
VLAN Commands
749
•
ip-address
— Source IP address. (Range: Any valid IP address)
•
subnet-mask
— Subnet mask. (Range: Any valid subnet mask)
•
vlanid
— VLAN to associated with subnet. (Range: 1-4093)
Default Configuration
No assigned ip-subnet.
Command Mode
VLAN Database mode
User Guidelines
This command has no user guidelines.
Example
The following example associates IP address with VLAN ID 100.
console(config-vlan)#vlan association subnet
192.245.23.45 255.255.255.0 100
vlan database
Use the vlan database command in Global Configuration mode to enter the
VLAN database configuration mode.
Syntax
vlan database
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
2CSPC4.XModular-SWUM200.book Page 749 Thursday, March 10, 2011 11:18 AM