Dell POWEREDGE M1000E - Manual (Page 1209)

Router Discovery Protocol Commands 1209
console(config-if-vlan15)#ip irdp minadvertinterval
100
ip irdp multicast
To send router advertisements as IP multicast packets, use the ip irdp
multicast command in Interface Configuration mode. To send router
advertisements to the limited broadcast address (255.255.255.255), use the
no form of this command.
Syntax
ip irdp multicast
no ip irdp multicast
Default Configuration
Router discovery packets are sent to the all hosts IP multicast address
(224.0.0.1) by default.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
If a subnet includes any hosts that do not accept IP multicast packets, send
router advertisements to the limited broadcast address.
Example
The following example configures router discovery to send to the limited
broadcast address:
console(config)#interface vlan 15804 Router Discovery
Protocol Commands www. d e l l . c om
| s u p p o r t .
d e l l .com console(config-if-vlan15)#no ip irdp
multicast
2CSPC4.XModular-SWUM200.book Page 1209 Thursday, March 10, 2011 11:18 AM