Dell POWEREDGE M1000E - Manual (Page 184)

184 Using the CLI
Gigabit Ethernet From Global
Configuration
mode, use the
interface
gigabitethernet
command. Or, use
the abbreviation
interface gi.
console (config-if-
Gi
unit/slot/port #
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
EXEC mode.
10 Gigabit
Ethernet
From Global
Configuration
mode, use the
interface
tengigabitethernet
command. Or, use
the abbreviation
interface te.
console (config-if-
Te
unit/slot/port #
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
EXEC mode.
Port Channel From Global
Configuration
mode, use the
interface port-
channel command.
Or, use the
abbreviation
interface po.
console (config-if-po port-
channel-number )#
To exit to Global
Configuration
mode, use the
exit command,
or
<Ctrl>+<Z>
to Privileged
EXEC mode.
VLAN From Global
Configuration
mode, use the
interface vlan
command.
console(config-if-vlan vlan-
id )#
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
EXEC mode.
Command Mode Access Method Command Prompt Exit or Access
Previous Mode
2CSPC4.XModular-SWUM200.book Page 184 Thursday, March 10, 2011 11:18 AM