Dell POWEREDGE M1000E - Manual (Page 207)

Using the CLI 207
Would you like to run the setup wizard (you must
answer this question within
60 seconds)?
[Y/N] n
Thank you for using Dell Easy Set up Wizard. You will
now enter CLI mode.
Applying Global configuration, please wait ...
Applying Interface configuration, please wait ...
console>
console>show switch
Management Preconfig Plugged-in Switch Code
Switch Status Model ID Model ID Status Version
------------ -------- ---------------------
1 Mgmt Switch PC6224 PC6224 OK 3.2.0.1
console>
Boot Utility Menu
If a user is connected through the serial interface during the boot sequence,
pressing the <esc> key interrupts the boot process and displays a Boot Utility
Menu. Selecting item 2 displays the menu and may be typed only during the
initial boot up sequence. When the system boot up is complete, typing the
escape sequence does not display the menu.
[][][][]CRC.........................................
...0xdd0a (56586)
2CSPC4.XModular-SWUM200.book Page 207 Thursday, March 10, 2011 11:18 AM