Dell POWEREDGE M1000E - Manual (Page 1420)

1416 RMON Commands
rmon collection history
Use the rmon collection history command in Interface Configuration mode
to enable a Remote Monitoring (RMON) MIB history statistics group on an
interface. To remove a specified RMON history statistics group, use the no
form of this command. Also see the show rmon collection history command.
Syntax
rmon collection history index [owner ownername ] [buckets bucket-number ]
[interval seconds ]
no rmon collection history index
• index — The requested statistics index group. (Range: 1–65535)
• owner ownername — Records the RMON statistics group owner name. If
unspecified, the name is an empty string.
• buckets bucket-number — A value associated with the number of buckets
specified for the RMON collection history group of statistics. If
unspecified, defaults to 50. (Range: 1 - 65535)
• interval seconds — The number of seconds in each polling cycle. If
unspecified, defaults to 1800. (Range: 1–3600)
Default Configuration
The buckets configuration is 50. The interval configuration is 1800 seconds.
Command Mode
Interface Configuration (gigabitethernet, port-channel, tengigabitethernet)
mode.
User Guidelines
This command cannot be executed on multiple ports using the interface
range command.
Example
The following example enables a Remote Monitoring (RMON) MIB history
statistics group on port 1/0/8 with the index number "1" and a polling interval
period of 2400 seconds.
2CSPC4.XModular-SWUM200.book Page 1416 Thursday, March 10, 2011 11:18 AM