Dell POWEREDGE M1000E - Manual (Page 774)

774 802.1x Commands
Parameter Description
This command has no arguments or keywords.
Default Configuration
Dot1x monitor mode is disabled.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example enables 802.1x globally.
console(config)# dot1x system-auth-control monitor
dot1x timeout guest-vlan-period
Use the dot1x timeout guest-vlan-period command in Interface
Configuration mode to set the number of seconds that the switch waits
before authorizing the client if the client is a dot1x unaware client.
Syntax
dot1x timeout guest-vlan-period seconds
seconds — Time in seconds that the switch waits before authorizing the
client if the client is a dot1x unaware client.
Default Configuration
The switch remains in the quiet state for 90 seconds.
Command Mode
Interface Configuration (Ethernet) mode
2CSPC4.XModular-SWUM200.book Page 774 Thursday, March 10, 2011 11:18 AM