Dell POWEREDGE M1000E - Manual (Page 1136)

1136 OSPF Commands
Syntax
show ip ospf range area-id
• area-id — Identifies the OSPF area whose ranges are being displayed.
(Range: IP address or decimal from 0–4294967295)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Example
The following example displays information about the area ranges for the
specified area-id.
console#show ip ospf range 20
Area ID IP Address Subnet Mask Lsdb Type Advertisement
------- ---------- --------- --------- -------------
0.0.0.20 192.168.6.0 255.255.255.0 Summary Link Enabled
show ip ospf statistics
This command displays information about recent Shortest Path First (SPF)
calculations. The SPF is the OSPF routing table calculation. The output lists
the number of times the SPF has run for each OSPF area. A table follows this
information. For each of the 15 most recent SPF runs, the table lists how long
ago the SPF ran, how long the SPF took, and the reasons why the SPF was
scheduled.
Syntax
show ip ospf statistics
2CSPC4.XModular-SWUM200.book Page 1136 Thursday, March 10, 2011 11:18 AM