Dell POWEREDGE M1000E - Manual (Page 1239)

Virtual Router Redundancy Protocol Commands 1239
• vrid — Virtual router identification. (Range: 1-255)
Default Configuration
The default configuration is disabled.
Command Mode
Interface Configuration (VLAN) mode.
User Guidelines
This command has no user guidelines.
vrrp authentication
Use the vrrp authentication command in Interface Configuration mode to
set the authentication details value for the virtual router configured on a
specified interface. Use the no form of the command to return the
authentication type to the default value.
Syntax
vrrp group authentication {none | simple key }
no vrrp group authentication
Syntax Description
Default Configuration
None is the default configuration.
Parameter Description
group The virtual router identifier. (Range: 1-255)
none Indicates authentication type is none.
simple Authentication type is a simple text password.
key The key for simple authentication. (Range: String values)
2CSPC4.XModular-SWUM200.book Page 1239 Thursday, March 10, 2011 11:18 AM